DVB-H

DVB-H Frame structure

DVB-H technology is a superset of the very successful DVB-T (Digital Video Broadcasting - Terrestrial) system for digital terrestrial television, with additional features to meet the specific requirements of handheld, battery-powered receivers.

DVB-H can offer a downstream channel at high data rates which can be used as standalone or as an enhancement of mobile telecommunication networks which many typical handheld terminals are able to access anyway.

Time slicing technology is employed to reduce power consumption for small handheld terminals. IP datagrams are transmitted as data bursts in small time slots. Each burst may contain up to two megabits of data (including parity bits). There are 64 parity bits for each 191 data bits, protected by Reed-Solomon codes. The front end of the receiver switches on only for the time interval when the data burst of a selected service is on air. Within this short period of time a high data rate is received which can be stored in a buffer. This buffer can either store the downloaded applications or playout live streams.

The achievable power saving depends on the relation of the on/off-time. If there are approximately ten or more bursted services in a DVB-H stream, the rate of the power saving for the front end could be up to 90%. DVB-H is a technical system which was carefully tested by the DVB-H Validation Task Force in the course of 2004 (see ETSI Technical Report TR 102 401). DVB-SH recently improved dramatically radio performances and is seen as an evolution of DVB-H.

DVB-H is designed to work in the following bands:
VHF-III (170-230 MHz, or a portion of it)
UHF-IV/V (470-862 MHz, or a portion of it)
L (1.452-1.492 GHz)

DVB-SH now and DVB-H2 in the near future will expand the supported bands.

DVB-H can coexist with DVB-T in the same multiplex.